Photonic band-gap enhanced second-harmonic generation in a planar lithium niobate waveguide

Enhanced second-harmonic generation (SHG) conversion efficiency was theoretically predicted in waveguide geometry with coupling to a one-dimensional grating photonic band gap (PBG). We report a series of experiments using samples made with lithium niobate. A waveguide was fabricated near the surface by applying the proton-exchange technique. The characteristics of waveguide modes were determined by several techniques: prism coupling, diffraction, and Cherenkov radiation. The WKB method was used to analyze the results. Ultraviolet laser lithography was applied to make PBG gratings on the sample. We further investigated Cherenkov second-harmonic generation (CSHG), i.e., SHG radiated into the substrate, under the condition of a band-edge PBG resonance in the waveguides. The SHG inside planar waveguides was also experimentally investigated. We fabricated waveguides with multiple pump modes and found that the second mode was more efficient in enhancing the second harmonic signal. This result is explained by our model. Several samples were investigated in detail; the highest conversion efficiency of CSHG with a PBG was enhanced around 50 times above the CSHG signal without a PBG. A numerical model was constructed with parameters calculated from our sample characterization data to interpret the experimental results.     

Application of heat pipe technology in thermal analysis of metals

Summary Thermal analysis has been used in foundry applications to assess the quality of the melt before casting. The high-end thermal analysis techniques such as DSC or DTA are expensive and not suitable for foundry applications. The Computer-Aided Cooling Curve Analysis (CA-CCA) method based on one thermocouple has been widely used as a batch process with poor control over heat extraction and cooling rates during solidification. A heat pipe apparatus has been developed as a thermal analysis tool. The apparatus can assess the melt quality more accurately, as well as, allow for better control of heating and cooling rates. Moreover, the solidification process can be modeled more accurately, and thus the casting parameters affecting the casting quality can be closely simulated and consequently controlled. In this paper the principles of a heat-pipe assisted thermal analysis system are highlighted. The advantages of the new system are described and the possibility of its adoption in melt assessments is discussed.     

Effect of electromagnetic actuations on the dynamics of a harmonically excited cantilever beam

The influence of electromagnetic actuators (EMAs) on the frequency response of a harmonically excited cantilever beam is investigated analytically, numerically and experimentally in this paper. Specifically, the intensity of the current generating the EMAs force is varied and its effect on the dynamic behavior of the system is analyzed. Analytical treatment based on perturbation analysis is performed on a simplified equation modeling the one mode vibration of the cantilever beam. Results indicated that EMAs produce a softening behavior in the system. Further, it is shown that as the current intensity of EMAs increases, the resonance curve shifts toward smaller values of frequency and the non-linear characteristic of the system becomes softer. The analytical predictions have been verified numerically and confirmed experimentally using a test rig.     

A simple Abel inversion method of interferometric data for temperature measurement in axisymmetric medium

In this work, we describe a simple method of Abel inversion for temperature measurement in a natural convection axisymmetric flow. The essence of the method is that the measured lateral fringe shift profile is fitted with a polynomial with only even powers and then Abel inverse integral is evaluated analytically. This technique is compared with recent existing methods to test the accuracy and error propagation using a simulated interferogram of natural convection flow below a downward-facing heated horizontal disk in air. For this comparison, lateral fringe profiles are simulated using temperature fields computed by solving Navier Stokes and energy equations. Through random-number generation, noise profile is artificially added to the simulated noise-free lateral fringe shift profile. The results showed that the proposed technique for Abel inversion leads to accurate temperature profiles when the lateral fringe shift profile is fitted with even-power polynomials having degrees ranging from 20 to 30.     

Numerical computation of natural convection in an isosceles triangular cavity with a partially active base and filled with a Cu–water nanofluid

This paper discusses the results of a study related to natural convection cooling of a heat source located on the bottom wall of an inclined isosceles triangular enclosure filled with a Cu water-nanofluid. The right and left walls of the enclosure are both maintained cold at constant equal temperatures, while the remaining parts of the bottom wall are insulated. The study has been carried out for a Rayleigh number in the range 10⁴ ≤ Ra ≤ 10⁶, for a heat source length in the range 0.2 ≤ ε ≤0.8, for a solid volume fraction in the range 0 ≤ ?≤0.06 and for an inclination angle in the range 0° ≤ δ≤45°. Results are presented in the form of streamline contours, isotherms, maximum temperature at the heat source surface and average Nusselt number. It is noticed that the addition of Cu nanoparticles enhances the heat transfer rate and therefore cooling effectiveness for all values of Rayleigh number, especially at low values of Ra. The effect of the inclination angle becomes more noticeable as one increases the value of Ra. For high Rayleigh numbers, a critical value for the inclination angle of δ = 15° is found for which the heat source maximum temperature is highest.     

Effect of Pregnancy on the Speaking Voice

The study aims to investigate the vocal symptoms and acoustic changes in pregnant women pre- and postpartum in comparison to the controls. A total of 25 pregnant women who presented for delivery were enrolled in this study. Twenty-one nonpregnant women were matched as controls. Vocal symptoms such as hoarseness, vocal fatigue, and aphonia were assessed. Acoustic analysis included fundamental frequency (F₀), habitual pitch, relative average perturbation (RAP), shimmer, noise-to-harmony ratio (NHR), and maximum phonation time (MPT). There were no significant differences in the incidence of vocal symptoms in pregnant women versus controls. However, vocal fatigue was more prevalent in the pregnant group. With respect to the acoustic parameters, there was a significant decrease in the MPT at term. The rest of the variables were comparable. Postpartum, the MPT significantly increased and there was an increase in F₀ and a significant decrease in the voice turbulence index (VTI). Pregnant women have more vocal fatigue and a reduction in MPT compared to the controls. Immediately after delivery, there is a significant increase in MPT.     

Synthesis and properties of a new copper(II)-hafnium phosphate Cu0.5Hf2(PO4)3

Phosphates of general formula M_0.5Hf₂(PO₄)₃ with M=Cd²⁺, Ca²⁺, Sr²⁺ and Cu²⁺ were prepared by coprecipitation and characterized by several physical techniques. The compounds containing Cd²⁺, Ca²⁺, Sr²⁺ belong to the Nasicon-type structure, whereas Cu_0.5Hf₂(PO₄)₃ exhibited substantially different DRX patterns. Combined temperature programmed reduction (TPR) and temperature-programmed oxidation (TPO) showed that the copper in Cu_0.5Hf₂(PO₄)₃ was distributed between two energetically different sites in proportions respectively equal to 40 and 60%. Electron Paramagnetic Resonance (EPR) investigations confirmed the TPR/TPO results and revealed that the two sites hosting the Cu²⁺ ions are of orthorhombic symmetry. Moreover, the Cu²⁺ ions might be reduced by hydrogen to Cu⁺. These results were also supported by the UV–visible studies that showed the disappearance, under reducing conditions, of the band corresponding to crystal field transitions of Cu²⁺ ions and the emergence of a new peak attributed to the transitions between (3d)¹⁰ and (3d)⁹(4s)¹ Cu⁺ levels. At the same time, IR spectroscopy confirmed that protons entered the open lattice framework of the material and gave rise to a new protonated phase containing monovalent copper Cu_0.5^IH_0.5Hf₂(PO₄)₃. This redox process was proven to be reversible without any subsequent change in the network of the phosphate.     

Practical tests for randomized complete block designs

A class of affine-invariant test statistics, including a sign test and a related family of signed-rank tests, is proposed for randomized complete block designs with one observation per treatment. This class is obtained by using the transformation-retransformation approach of Chakraborty, Chaudhuri and Oja along with a directional transformation due to Tyler. Under the minimal assumption of directional symmetry of the underlying distribution, the null asymptotic distribution of the sign test statistic is shown to be chi-square with p-1 degrees of freedom. The same null distribution is also proved for the family of signed-rank statistics under the assumption of symmetry of the underlying distribution. The Pitman asymptotic relative efficiencies of the tests, relative to Hotelling-Hsu's T² are established. Several score functions are discussed including a simple linear score function and the optimal normal score function. The test based on the linear score function is compared to the other members of this family and other statistics in the literature through efficiency calculations and Monte Carlo simulations. This statistic has an excellent performance over a wide range of distributions and for small as well as large dimensions.     

Assessing Adherence to Antihypertensive Medication by Means of Dose-Dependent Reference Plasma Concentration Ranges and Ultra-High Performance Liquid Chromatography-Ion Trap Mass Spectrometry Analysis

Poor adherence to antihypertensive drug therapy is a well-recognized problem and can be assessed by mass spectrometry-based analyses of body fluids. However, contrary statements exist whether drug quantification in blood or qualitative screening in urine is more suitable. The present pilot study aimed to further elucidate the power of blood plasma drug concentrations for adherence monitoring by developing and validating a quantification procedure for nine antihypertensive drugs (amlodipine, bisoprolol, candesartan, canrenone, carvedilol, metoprolol, olmesartan, torasemide, and valsartan) in blood plasma using liquid–liquid extraction and an ultra-high-performance liquid chromatography-ion trap mass spectrometry analysis. The procedure should then be used for an adherence assessment and compared with the results of an established qualitative urine screening. Selectivity, carryover, matrix effect, accuracy, precision, dilution integrity, and stability were successfully validated, except for amlodipine. The applicability was demonstrated by analyzing 19 plasma samples containing 28 antihypertensive drugs and comparing the measured concentrations with calculated dose-dependent reference plasma concentration ranges. The interpretation of plasma concentrations was found to be more sophisticated and time-consuming than that of urine screening results, and adherence could not be assessed in two cases (10%) due to measured plasma concentrations below the lower limit of quantification. However, 14 out of 19 subjects were classified as adherent (75%) and three as nonadherent (15%), in contrast to 19 (100%) that were claimed to be adherent based on the results of the qualitative urine screening. Nevertheless, further data is needed to estimate whether plasma quantification is superior in terms of assessing adherence to antihypertensive medication.